LEGACY™ Control System Registration
Return a Legacy Control System
Place the Cab-2 remote in the Legacy Base cradle.
Wrap the base/remote combo in bubble wrap to protect it
This is how the base/remote should look once you have wrapped it in the bubble wrap.
Place Styrofoam shipping peanuts in the bottom of a 12" x 6" x 6" box or larger
Place the bubble wrapped base and remote in the box on top of the peanuts.
Insert either foam or Styrofoam or similar material on both ends of the base to protect it during shipment.
Place Styrofoam peanuts on the top of the wrapped base/remote.
Seal the box with packing tape.
With a magic marker write your RA number in large characters on the outside of the box.
Once you have completed Step 9, please check to make sure your base/remote does not rattle or move inside the box when shaken! If it does rattle or move, please add more foam and/or packing peanuts until it no longer rattles or moves.
Ship your box to:
6655 Seville Dr
Canfield, OH 44406-9143
Your RA number will be how your base/remote is tracked while being upgraded, it is imperative you save this information and write it clearly on the outside of the box!