Block Power Operation


This help page will teach you to operate a Block Power (bulb) icon that controls a relay on a device like an LCS BPC2.

Requirements


Remember that block power icons must have been properly configured before you can run them from LCS App!

To Operate a Block Power icon


  • From the Operating Screen, swipe left or right until the desired custom control panel is in view. A Block Power icon is shown below:
BlockPower Op ON
  • Tap any visible Block Power (bulb) icon. The bulb will dim, as will any associated track pieces. The corresponding relay in your LCS BPC2 or other device will switch off.
  • BlockPower Op OFF
  • Tap it again to restore power to that track section.



If the corresponding section on your layout does not operate, re-check your WiFi configuration and your Block Power Setup.