| |
Pages
179
-
179
The Electric RR Co.
Upgrades by Electric RR
The Electric RR Co. specializes in command control compatible product design. For more information on these and other Electric RR products, or product installation questions, please call 408-454-4127, or visit www.electricrr.com.
|
|
|
Cruise Commander
Take command of locomotive speed with Cruise Commander, a patented breakthrough in speed control technology. The Cruise Commander provides constant speed and ultra-slow operation of your locomotives, and it's simple to install. While in operation, information about your locomotive's velocity is monitored from the motor directly. If dual-motored, each motor is balanced to the other, synchronizing the motors for smooth and quiet operation. Lash-ups are also possible when locomotives are aligned using the exclusive "nudge" feature.
|
| FEATURES : |
- Simple Tach-Less installation and operation
|
- High Frequency (20khz) PWM for silent motor operation
|
- Operates in command and conventional modes
|
- CAB-1 selectable 32 or 100 (default) speed steps
|
- Uses R2LC to be fully compliant with TMCC standards
|
- Horn pulse to control modern-era and post-war horns/whistles
|
- Directly drives LED's lighting without complex "load" resistor wiring
|
- Will run both Pullmor AC and DC can-type motors
|
- On-board micro-controller provides future enhancement capabilities
|
- Splice-free connections make installation simple and quick
|
- Heat-sink has "PemNut", no more stripped mounting holes!
|
Dimensions: 2.75" L x 1.25" W x 1.2" H
(6-24267) $119.95
|
|
|
|
|
Cruise Commander™ "M"
For Modular TMCC locomotives, upgrade your speed control with Cruise Commander “M”. Imagine how many locos without flywheels that can now have cruise functionality! The Cruise Commander “M” replaces the Lionel modular motor driver. It is plug compatible, and a minimal install only requires the addition of a single wire to the serial data for operation.
|
| FEATURES : |
- Simple Tach-Less installation and operation
|
- High Frequency (20khz) PWM for silent drive
|
- Operates in command and conventional modes
|
- CAB-1 selectable 32 or 100 (default) speed steps
|
- Serial data out for configuration acknowledgment
|
- Will run both Pullmor AC and DC can-type motors
|
- Directly drives LED's lighting without complex "load" resistor wiring
|
- LED's lighting features include markers and oscillating ditch lamps
|
- On-board micro-controller provides future enhancement capabilities
|
Dimensions: 2.4" L x 1.63" W x 0.8" H
(6-24268) $89.95
|
|
|
|
|
Diesel Sound Commander 2
With Sound Commander 2, you get a low cost way to add sound to your locomotives. The Sound Commander 2 has extended conventional mode functionality, including two volume selections. With its small, compact size, it can be installed into many Modern era and Post war locomotives, yet delivers over 1 watt of output power. This sound upgrade kit can operate in conventional mode with horn / bell buttons, or in command mode when interfaced to compliant products.
|
| SOUND COMMANDER 2 KIT INCLUDES: |
- "Low profile" 2 inch diameter speaker, speaker baffle, mounting supplies, comprehensive installation manual, and connection cables for conventional and command operation.
|
| FEATURES: |
- Conventional and Command mode operation
|
- Command mode volume control from the CAB-1, 4 levels and mute
|
- Conventional mode volume control with jumper or switch
|
- Custom sound processor for field upgrades or enhancements
|
- Direct connection to the entire Electric Railroad product line
|
| ADDITIONAL DIESEL FEATURES : |
- Prime Mover revs with 4 speed levels, 4 volume levels and mute
|
- Volume of Prime Mover and Warning Sounds individually settable
|
- Monitors 32/100 speed step selections to adjust rev level appropriately
|
- Choose one of the following diesel sound sets: GP7/GP9, ALCo, RDC,F3/F7, GG-1
|
| COMMAND & CONVENTIONAL MODE SOUNDS : |
|
|
- Coupler Clank (activated by Bell button in conventional mode)
|
- Air Release (activated by Bell button in conventional mode)
|
- Diesel - Prime Mover revs
|
Dimensions: 1.5" L x 1.25" W x 0.75" H
(6-24269) $49.95
|
|
|
|
|
Steam Sound Commander 2
With Sound Commander 2, you get a low cost way to add sound to your locomotives. The Sound Commander 2 has extended conventional mode functionality, including two volume selections. With its small, compact size, it can be installed into many Modern era and Post war locomotives, yet delivers over 1 watt of output power. This sound upgrade kit can operate in conventional mode with horn / bell buttons, or in command mode when interfaced to compliant products.
|
| SOUNDS COMMANDER 2 KIT INCLUDES: |
- "Low profile" 2 inch diameter speaker, speaker baffle, mounting supplies, comprehensive installation manual, and connection cables for conventional and command operation.
|
| FEATURES: |
- Conventional and Command mode operation
|
- Command mode volume control from the CAB-1, 4 levels and mute
|
- Conventional mode volume control with jumper or switch
|
- Custom sound processor for field upgrades or enhancements
|
- Direct connection to the entire Electric Railroad product line
|
| ADDITIONAL STEAMER FEATURES : |
- Steam Idle sounds with Brake Compressor sounds
|
- Chuff cadence (4 unique chuffs) triggered from external chuff switch
|
- Volume of Chuff and Warning Sounds individually settable
|
- Blow Off sound, controlled from the CAB-1
|
- Choose one of the following steam sound sets: Atlantic, Pennsylvania, Switcher
|
| COMMAND & CONVENTIONAL MODE SOUNDS : |
|
|
- Coupler Clank (activated by Bell button in conventional mode)
|
- Air Release (activated by Bell button in conventional mode)
|
- Steamer - Idle steam, compressor pump
|
Dimensions: 1.5" L x 1.25" W x 0.75" H
(6-24269b) $54.95
|
|
|
|
|
